Warmup DWM-30-120 Sticky Mat 120V 420W 3W X 10L 3.50 Amps Covers 30 Sq Ft
PRODUCT CODES
DWM-sqft-voltage
PRODUCT DESCRIPTION
The Warmup StickyMat system is a series of small 3ft wide mats aimed for bathroom installations under tile & stone. It is specifically suitable for time-restricted environments such as residential multihousing and commercial units.
StickyMats are a dual-adhesive with double sided tape as well as a pressure-sensitive adhesive on the entire mesh, allowing for a fast set-up. They can be combined and patch-worked into the room to customize the coverage. Each mat is built with a dual-conductor cable with a single power cord to connect to the thermostat.
StickyMats are available in 3x3, 3x5, 3x6, 3x8 and 3x10ft.
ADVANTAGES
The thinnest dual-fluoropolymer coated heating wire (less than 1/8" diameter).
StickyMat with pressure sensitive adhesive, for the fastest and most secure installation.
Can be repositioned easily without losing adhesion.
The pressure sensitive adhesive ensures that no wire or mesh is raised when tiling or covering with self-leveling compound.
LIMITATIONS
Do not cut the cable or apply the cable with staples. Apply caution to avoid nailing through the cable and avoid installation under permanent fixtures.
The StickyMat is designed for primary heating provided the subfloor is properly insulated. Refer to Warmups WIB-Warmup Insulation Boards to provide additional insulation over uninsulated slabs on grade.
SPECIFICATIONS
Operating voltage 120V
Width 3ft
Cable thickness 1/8" (3mm)
Inner / Outer Insulation Advanced fluoropolymer (ETFE)
Output rating 14W/sq ft
Coil tail length 10ft (3m)
Approvals cULus
Applications
Suitable Floor Coverings
Tile, Stone, Porcelain
Vinyl and LVTs
Glued-down carpet
Glued-down wood
Suitable Sub-Floor
Plywood & OSB
Polymer-modified leveler
Concrete slab
Cement boards
Insulation Boards with cementitious coating
Min. coverage 3/8" thinset or self-leveling compound
Max. coverage 3/4" thinset or self-leveling compound
Model Mat length (ft) Width Area (Sqft) Wattage Amps Resistance
DWM-09-120 3.0 3.0 9 126 1.05 114.3
DWM-15-120 5.0 3.0 15 210 1.75 68.5
DWM-18-120 6.0 3.0 18 252 2.10 57.1
DWM-24-120 8.0 3.0 24 336 2.80 42.9
DWM-30-120 10.0 3.0 30 420 3.50 34.3